How to Hang Rope Lights Outdoors
How to hang rope lights outdoors with clips, plus how to match the clip to your rope and keep plugs dry.
Rope lights hang well when the clips match the rope and the plug sits in a dry spot. This guide covers the steps. For clip picks see rope light clips, and for rope picks see best LED rope lights.
The Short Version
Measure your rope’s diameter, buy clips for that size, mark the route, fix the clips along it, and snap the rope in. Keep the plug and any connectors off the ground and out of standing water.
What You Need
- Clips that list your rope size (1/4 inch, 3/8 inch, and 1/2 inch are common)
- A drill and screws, or adhesive hooks for no-drill mounting
- An outdoor-rated outlet and extension cord
- End caps and sealant if you cut the rope
Steps
- Lay the rope along the route to check the length.
- Mark the clip positions along the route.
- Fix the clips with screws, or press adhesive hooks onto a clean smooth surface.
- Press the rope into the clips along the run, without kinking it at corners.
- Route the plug to an outdoor outlet and keep connectors off the ground.
Match the Clip
| Clip | Listed fit |
|---|---|
| Command Outdoor Rope Light Clips | Rope up to 3/8 inch, adhesive |
| Lyrlidr | 1/4 inch, screw |
| Nanzgecc, mankk, adlkirg, Waziaqoc | 1/2 inch, screw |
| Tmyjfjingxi, mxuteuk | 11 to 13 mm, screw |
Who Should Look Elsewhere
- Hanging a neon rope? Use different clips; see neon rope light mounting clips
- Want a quick holiday strand with a plug and remote? See outdoor LED rope lights
Frequently Asked Questions
Can I hang rope lights without drilling?
Yes, with adhesive hooks such as Command’s, on clean smooth surfaces.
How far apart should the clips be?
Follow the rope’s instructions and add clips at corners.
Do rope lights get hot?
Follow the manual; check the maker’s guidance on heat and covering.
Safety note: most rope lights plug into 120V household power. Use only the plug and cord supplied, look for a UL or ETL mark, use outdoor-rated outlets and cords outside, keep plugs and connectors out of standing water, and follow the manual. Anything that connects to a household circuit should be done by a licensed electrician.
Check current pricing and availability for the Command Outdoor Rope Light Clips.

