8 Best Motion Sensor Light Switches of 2026
Eight in-wall motion sensor light switches compared on wiring requirements, load ratings, coverage, and modes.
By Ethan Cole
Updated November 5, 2026
A motion sensor light switch replaces a standard wall switch and turns the light on when you enter and off after a delay. It is the way to add motion control to an existing ceiling or wall fixture.
Many switches need a neutral wire in the box. If yours has none, see our no neutral wire motion sensor switches guide. For fixtures with the sensor built in, see hardwired motion sensor ceiling lights.
Safety note: hardwired fixtures and wall switches connect to household wiring. Turn off the breaker and confirm the power is off before you start, match the fixture to the box, and use a licensed electrician if you are not experienced with home wiring. Check the load rating, the box size, and your local code, and look for a UL or ETL mark. Listings differ; we describe what each maker lists.
All Products Compared
| Product | Best For | Wiring | Rated Load | Control |
|---|---|---|---|---|
| Lutron Motion Sensor Light Switch, 2 Amp Single Pole (MS-OPS2) | Daylight Learning | Single pole | 2 Amp, 150W LED/CFL (listed) | Occupancy or vacancy, delay 1 to 30 min |
| Leviton Decora Motion Sensor Light Switch, 2 Amp (DOS02) | Neutral Optional | Single pole | 2 Amp, 150W LED/CFL (listed) | 180 degree view, 900 sq ft |
| GE In-Wall Motion Sensing Light Switch | Long Range | Single pole, neutral required | See listing | Occupied and vacant modes, 30 ft range |
| Kasa Smart Wi-Fi Motion Sensor Switch (KS200M) | Smart Home Control | Single pole, neutral required | 300W CFL/LED, 600W incandescent (listed) | Wi-Fi, Alexa and Google Home |
| DEWENWILS 2 Pack Motion Sensor Light Switch (5A) | 2-Pack, 26 ft Range | Single pole, neutral required | 5A, up to 1/4 HP (listed) | 180 degrees, 26 ft, 5 s to 10 min |
| ECOELER Motion Sensor Light Switch (Neutral Required) | Adjustable Sensitivity | Single pole, neutral required | 300W LED/CFL, 600W incandescent (listed) | 15 s to 30 min, 180 degrees, 30 ft |
| TOPGREENER In-Wall PIR Motion Sensor Light Switch (TSOS5, 2 Pack) | 2-Pack, Manual Override | Single pole, neutral required | 4A, 500W (listed) | Auto and manual override |
| BESTTEN 5 Pack Motion Sensor Light Switch (120/277V) | 5-Pack for Many Rooms | Single pole, neutral required | 300W LED, 800W incandescent (listed) | Occupancy or vacancy, 180 degrees |
| Award | Product | WikiHomeLED Score About WikiHomeLED ScoreThe WikiHomeLED Score is our own rating from 0 to 10, calculated the same way for every product from Amazon buyer ratings, adjusted for how many ratings each product has. It is never influenced by manufacturers, retailers, or affiliate commissions. Learn more › | Price | |
|---|---|---|---|---|
Lutron Motion Sensor Light Switch
|
$20.67 | Buy | ||
Leviton Decora Motion Sensor Light Switch, 2 Amp
|
$21.24 | Buy | ||
GE in-Wall Motion Sensing Light Switch
|
$20.67 | Buy | ||
Kasa Smart Wi-Fi Motion Sensor Switch KS200M
|
$22.99 | Buy | ||
DEWENWILS 2pack Motion Sensor Light Switch，Motion
|
$19.99 | Buy | ||
ECOELER Motion Sensor Light Switch
|
$14.99 | Buy | ||
TOPGREENER In-Wall PIR Motion Sensor Light Switch
|
$28.99 | Buy | ||
BESTTEN 5PK Motion Sensor Light Switch
|
$49.99 | Buy |
Lutron Motion Sensor Light Switch
Leviton Decora Motion Sensor Light Switch, 2 Amp
GE in-Wall Motion Sensing Light Switch
Kasa Smart Wi-Fi Motion Sensor Switch KS200M
DEWENWILS 2pack Motion Sensor Light Switch，Motion
ECOELER Motion Sensor Light Switch
TOPGREENER In-Wall PIR Motion Sensor Light Switch
BESTTEN 5PK Motion Sensor Light Switch
Top 3 Motion Sensor Light Switches Reviewed
#1 Lutron Motion Sensor Light Switch, 2 Amp Single Pole (MS-OPS2): Daylight Learning
Why We Picked It
A single-pole motion sensor switch that learns the room’s light level and can keep lights off when it is already bright. It has occupancy and vacancy modes, a delay-off of 1, 5, 15, or 30 minutes, and works with 150W CFL/LED and 250W incandescent loads, per the listing.
Key Specifications
- Wiring: Single pole (listed)
- Rated Load: 2 Amp, 150W LED/CFL (listed)
- Control: Occupancy or vacancy, delay 1 to 30 min
- Load: 150W CFL/LED, 250W incandescent, 2 Amp (listed)
- Delay-off: 1, 5, 15, or 30 minutes (listed)
| Pros | Cons |
|---|---|
|
|
Things to Consider
The listing says it can use the ground wire if no neutral is in the box, but it is single pole only. Confirm your wiring before buying.
Best For
A bathroom, laundry room, or garage where you want a dependable switch.
Skip It If
You have a three-way circuit.
Check current pricing and availability for the Lutron Motion Sensor Light Switch, 2 Amp Single Pole (MS-OPS2).
#2 Leviton Decora Motion Sensor Light Switch, 2 Amp (DOS02): Neutral Optional
Why We Picked It
A 2 Amp Decora switch with a 180 degree field of view and 900 sq ft of coverage per the listing. The title says no neutral is required, and the listing adds that ground is required. It handles 150W LED/CFL and 250W incandescent or halogen.
Key Specifications
- Wiring: Single pole (listed)
- Rated Load: 2 Amp, 150W LED/CFL (listed)
- Control: 180 degree view, 900 sq ft
- Load: 150W LED/CFL, 250W incandescent (listed)
- Coverage: 180 degrees, 900 sq ft (listed)
| Pros | Cons |
|---|---|
|
|
Things to Consider
Leviton’s title and bullet say it works with or without a neutral, but a ground wire is required. Check your box.
Best For
Older homes with no neutral at the switch box.
Skip It If
You want a smart switch.
Check current pricing and availability for the Leviton Decora Motion Sensor Light Switch, 2 Amp (DOS02).
#3 GE In-Wall Motion Sensing Light Switch: Long Range
Why We Picked It
A GE in-wall switch with occupied and vacant modes, a motion zone of 150 degrees with a range of up to 30 ft, an adjustable off time up to 30 minutes, and a four-hour countdown mode. The title says a neutral wire is required.
Key Specifications
- Wiring: Single pole, neutral required (listed)
- Rated Load: See listing
- Control: Occupied and vacant modes, 30 ft range
- Range: up to 30 ft, 150 degrees (listed)
- Off time: up to 30 minutes (listed)
| Pros | Cons |
|---|---|
|
|
Things to Consider
The listing is light on load figures, so read the product sheet before wiring it to a high-wattage fixture.
Best For
A larger room where you want a longer sensing range.
Skip It If
Your box has no neutral.
Check current pricing and availability for the GE In-Wall Motion Sensing Light Switch.
Other Options Worth Considering
How to Choose a Motion Sensor Light Switch
Wiring
Check whether your switch box has a neutral and a ground. The listing will say which are required. Single-pole switches do not work on three-way circuits.
Load Rating
LED loads are often rated lower than incandescent. Add up the watts of the lights on the circuit and stay under the LED rating.
Occupancy or Vacancy
Occupancy mode turns the light on and off automatically. Vacancy mode needs a manual on and turns it off for you.
Coverage and Timers
Look at the sensing angle, range, and the adjustable delay-off. Longer ranges suit larger rooms.
How We Evaluate Motion Sensor Light Switches
We did not install or run these products. We compared manufacturer specifications and Amazon listing details, selected November 6, 2026. We could not retrieve current Amazon star ratings or rating counts for these listings, so they carry no WikiHomeLED Score, we show no star ratings, and the order is our editorial judgment of the listed specifications, not a score. We looked at wiring requirements, rated load, coverage, adjustable timers, modes, and any safety listing. We kept one listing per product family and no more than three per brand. Battery capacity, lumen, range, and runtime figures are as published by each seller and are not our measurements; where a listing is vague or contradicts itself, we say so. Read recent customer reviews before you buy. The full method is on our How We Review page.
Frequently Asked Questions
Do I need a neutral wire?
Many switches do. A few work without one but still require a ground. Check the listing.
Will it work with my LED bulbs?
Check the LED rating on the switch. Dimmable LEDs may need a compatible model.
What is the difference between occupancy and vacancy?
Occupancy turns lights on and off automatically. Vacancy needs you to turn them on.
Can I install one myself?
If you are comfortable with household wiring, turn off the breaker first. Otherwise hire a licensed electrician.
Final Verdict
Lutron is our first pick for a dependable single-pole switch with light-level learning, Leviton for homes with no neutral wire, and GE for a longer sensing range. Kasa adds smart-home control at the cost of needing a neutral wire.
More in Motion Sensor Lights and Kitchen and Closet Lighting. See also our no neutral wire motion sensor switches guide.
About the author
Ethan Cole leads research and editing at WikiHomeLED, comparing LED lighting for the home through manufacturer specs, manuals, safety listings and owner feedback. Every product is scored against the criteria on our How We Review page, and picks are updated when models change.