7 Best Motion Sensor Light Switches With No Neutral Wire of 2026
Seven motion sensor switches that do not need a neutral wire, compared on ground requirements, loads, and features.
By Ethan Cole
Updated November 8, 2026
Older homes often have switch boxes with no neutral wire. Some motion sensor switches are built to work without one, but most still need a ground, and a few need neither.
This list covers switches that do not need a neutral wire. For the general list see our motion sensor light switches guide.
Safety note: hardwired fixtures and wall switches connect to household wiring. Turn off the breaker and confirm the power is off before you start, match the fixture to the box, and use a licensed electrician if you are not experienced with home wiring. Check the load rating, the box size, and your local code, and look for a UL or ETL mark. Listings differ; we describe what each maker lists.
All Products Compared
| Product | Best For | Wiring | Rated Load | Notes |
|---|---|---|---|---|
| Leviton Decora Motion Sensor Light Switch, 2 Amp (DOS02, No Neutral Required) | Neutral Optional | Single pole | 2 Amp, 150W LED/CFL (listed) | Ground required |
| Lutron Motion Sensor Light Switch, 2 Amp Single Pole (MS-OPS2) | Light Learning, Ground Fallback | Single pole | 2 Amp, 150W LED/CFL (listed) | Uses ground if no neutral |
| TOPGREENER 2 Pack No Neutral No Ground Motion Sensor Switch (TDOS5) | No Ground Needed, 2-Pack | Single pole | 300W tungsten, 5 to 150W LED (listed) | No ground required |
| RAYZEEK PIR Motion Sensor Switch, No Neutral No Ground (5A) | Old 2-Wire Homes | Single pole | 5A, 1/6 HP (listed) | For old 2-wire homes |
| TOPGREENER Occupancy/Vacancy Switch with CDS Learning (No Neutral No Ground) | Learning Sensor | Single pole | 200W incandescent, 150W LED (listed) | Ambient light learning |
| ELEGRP Motion Sensor Light Switch, 300W LED (No Neutral) | Higher LED Rating | Single pole | 300W LED/CFL, 600W incandescent (listed) | Ground required |
| ECOELER Motion Sensor Light Switch, Single Pole (No Neutral Wire) | Adjustable Timer | Single pole | 300W LED/CFL, 600W incandescent (listed) | Ground required |
| Award | Product | WikiHomeLED Score About WikiHomeLED ScoreThe WikiHomeLED Score is our own rating from 0 to 10, calculated the same way for every product from Amazon buyer ratings, adjusted for how many ratings each product has. It is never influenced by manufacturers, retailers, or affiliate commissions. Learn more › | Price | |
|---|---|---|---|---|
Leviton Decora Motion Sensor Light Switch, 2 Amp
|
$21.24 | Buy | ||
Lutron Motion Sensor Light Switch
|
$20.67 | Buy | ||
TOPGREENER PIR Motion Sensor Light Switch,No
|
$25.99 | Buy | ||
RAYZEEK PIR Motion Sensor Light Switch
|
$17.99 | Buy | ||
TOPGREENER Occupancy/Vacancy PIR Motion Sensor
|
$21.99 | Buy | ||
ELEGRP Motion Sensor Light Switch
|
$27.99 | Buy | ||
ECOELER Motion Sensor Light Switch
|
$14.99 | Buy |
Leviton Decora Motion Sensor Light Switch, 2 Amp
Lutron Motion Sensor Light Switch
TOPGREENER PIR Motion Sensor Light Switch,No
RAYZEEK PIR Motion Sensor Light Switch
TOPGREENER Occupancy/Vacancy PIR Motion Sensor
ELEGRP Motion Sensor Light Switch
ECOELER Motion Sensor Light Switch
Top 3 No Neutral Wire Motion Sensor Switches Reviewed
#1 Leviton Decora Motion Sensor Light Switch, 2 Amp (DOS02, No Neutral Required): Neutral Optional
Why We Picked It
A 2 Amp Decora switch whose title says no neutral is required. The listing says it works with or without a neutral and that ground is required, with 180 degree coverage across about 900 sq ft.
Key Specifications
- Wiring: Single pole (listed)
- Rated Load: 2 Amp, 150W LED/CFL (listed)
- Notes: Ground required
- Load: 150W LED/CFL, 250W incandescent (listed)
- Coverage: 180 degrees, 900 sq ft (listed)
| Pros | Cons |
|---|---|
|
|
Things to Consider
Always confirm that your box has a ground. The listing is clear that it will not run without one.
Best For
A pantry, closet, or basement room in an older home with no neutral.
Skip It If
Your box has neither neutral nor ground. See TOPGREENER or RAYZEEK below.
Check current pricing and availability for the Leviton Decora Motion Sensor Light Switch, 2 Amp (DOS02, No Neutral Required).
#2 Lutron Motion Sensor Light Switch, 2 Amp Single Pole (MS-OPS2): Light Learning, Ground Fallback
Why We Picked It
A Lutron Maestro sensor switch whose listing says you can use the ground wire if no neutral is available. It learns room light level, has occupancy and vacancy modes, and delays off by 1, 5, 15, or 30 minutes.
Key Specifications
- Wiring: Single pole (listed)
- Rated Load: 2 Amp, 150W LED/CFL (listed)
- Notes: Uses ground if no neutral
- Load: 150W CFL/LED, 250W incandescent (listed)
- Delay-off: 1, 5, 15, or 30 minutes (listed)
| Pros | Cons |
|---|---|
|
|
Things to Consider
The listing calls it a flexible install with the ground wire. A neutral is not needed, but a ground must be present.
Best For
A laundry room or garage where you want daylight-aware control.
Skip It If
You have neither neutral nor ground.
Check current pricing and availability for the Lutron Motion Sensor Light Switch, 2 Amp Single Pole (MS-OPS2).
#3 TOPGREENER 2 Pack No Neutral No Ground Motion Sensor Switch (TDOS5): No Ground Needed, 2-Pack
Why We Picked It
A two-pack of switches that need neither a neutral nor a ground wire, with interchangeable hot and load wires, 180 degree coverage up to 1,200 sq ft, and delays of 10, 20, or 30 minutes. UL listed per the listing.
Key Specifications
- Wiring: Single pole (listed)
- Rated Load: 300W tungsten, 5 to 150W LED (listed)
- Notes: No ground required
- Coverage: 180 degrees, 1,200 sq ft (listed)
- Load: 5 to 150W LED, 300W tungsten (listed)
| Pros | Cons |
|---|---|
|
|
Things to Consider
A switch with no neutral relies on a small leakage current. The listing notes loads of 5 to 150W LED, so very low-wattage bulbs may flicker.
Best For
Older homes with two-wire boxes.
Skip It If
You need a high LED wattage.
Check current pricing and availability for the TOPGREENER 2 Pack No Neutral No Ground Motion Sensor Switch (TDOS5).
Other Options Worth Considering
How to Choose a Switch With No Neutral Wire
Open the Box First
With the breaker off, look in the box. Note whether there is a neutral (usually white), a ground (bare or green), and how many wires there are.
Ground or No Ground
Some switches need a ground. A few, such as TOPGREENER and RAYZEEK, say they need neither.
Load Rating
No-neutral switches often have lower LED ratings, and very low-wattage bulbs can flicker. Read the minimum and maximum load.
Occupancy and Vacancy
Occupancy turns lights on and off automatically. Vacancy needs a manual on.
How We Evaluate No Neutral Wire Motion Sensor Switches
We did not install or run these products. We compared manufacturer specifications and Amazon listing details, selected November 6, 2026. We could not retrieve current Amazon star ratings or rating counts for these listings, so they carry no WikiHomeLED Score, we show no star ratings, and the order is our editorial judgment of the listed specifications, not a score. We looked at neutral and ground requirements, rated load, modes, coverage, and any safety listing. We kept one listing per product family and no more than three per brand. Battery capacity, lumen, range, and runtime figures are as published by each seller and are not our measurements; where a listing is vague or contradicts itself, we say so. Read recent customer reviews before you buy. The full method is on our How We Review page.
Frequently Asked Questions
Why do some switches need a neutral?
A neutral gives the sensor a steady power source. Switches without one use a small leakage current through the lamp.
Will LEDs flicker?
Very low-wattage bulbs can. Some listings give a minimum load.
Do I still need a ground?
Many do. Check the listing.
Can I install one myself?
If you are comfortable with household wiring, turn off the breaker first. Otherwise hire a licensed electrician.
Final Verdict
Leviton is our first pick for a slim switch that does not need a neutral, Lutron for daylight learning, and TOPGREENER for boxes with neither neutral nor ground. Check your wiring before you buy.
More in Motion Sensor Lights and Kitchen and Closet Lighting. See also our motion sensor light switches guide.
About the author
Ethan Cole leads research and editing at WikiHomeLED, comparing LED lighting for the home through manufacturer specs, manuals, safety listings and owner feedback. Every product is scored against the criteria on our How We Review page, and picks are updated when models change.