Lutron Motion Sensor Light Switch (MS-OPS2) Review
Review of the Lutron Motion Sensor Light Switch (MS-OPS2), based on its Amazon listing and specifications.
By Ethan Cole
Updated November 6, 2026
Lutron’s MS-OPS2 is a single-pole motion sensor switch that learns the room’s light level. This review covers modes, load, and wiring.
See how it ranks in our motion sensor light switches guide, where it is #1 of 8.
Our Verdict
It is a dependable switch for a bathroom, laundry room, or garage. It is single pole only and has a low LED rating.
Key Specifications
| Spec | Listed |
|---|---|
| Wiring | Single pole |
| Rated Load | 2 Amp, 150W LED/CFL (listed) |
| Control | Occupancy or vacancy, delay 1 to 30 min |
| Load | 150W CFL/LED, 250W incandescent, 2 Amp (listed) |
| Delay-off | 1, 5, 15, or 30 minutes (listed) |
Modes, Load, and Wiring
The listing describes occupancy and vacancy modes, a delay-off of 1, 5, 15, or 30 minutes, and a rating of 150W CFL or LED and 250W incandescent at 2 Amps. It can use the ground wire when no neutral is available.
Things to Consider
The listing says it can use the ground wire if no neutral is in the box, but it is single pole only. Confirm your wiring before buying.
Pros and Cons
| Pros | Cons |
|---|---|
|
|
Who Should Buy It
- A bathroom, laundry room, or garage where you want a dependable switch.
Who Should Look Elsewhere
- You have a three-way circuit.
How We Evaluated It
We did not install or run this product. This review is based on the Amazon listing and manufacturer specifications, selected November 6, 2026. We could not retrieve current Amazon star ratings, so it carries no WikiHomeLED Score and we show no star ratings. We compared it on the same criteria as every product in our motion sensor light switches guide. Figures such as battery, lumen, range, and runtime are as published by the seller and are not our measurements. Our method is on the How We Review page.
Frequently Asked Questions
Does it work with LEDs?
Yes, up to the listed 150W LED rating.
What should I check before buying?
The listing says it can use the ground wire if no neutral is in the box, but it is single pole only. Confirm your wiring before buying.
Where does it rank in your guide?
It is #1 of 8 in our guide, based on listed specifications and not on a score.
Safety note: hardwired fixtures and wall switches connect to household wiring. Turn off the breaker and confirm the power is off before you start, match the fixture to the box, and use a licensed electrician if you are not experienced with home wiring. Check the load rating, the box size, and your local code, and look for a UL or ETL mark. Listings differ; we describe what each maker lists.
Check current pricing and availability for the Lutron Motion Sensor Light Switch (MS-OPS2).
About the author
Ethan Cole leads research and editing at WikiHomeLED, comparing LED lighting for the home through manufacturer specs, manuals, safety listings and owner feedback. Every product is scored against the criteria on our How We Review page, and picks are updated when models change.