Ameistor vs GOOMEEYA Plug-In Dual Motion Sensor Stair Lights

Ameistor and GOOMEEYA both sell plug-in stair lights with a sensor at each end, but one lights steps in sequence and the other is a single strip. This comparison uses their listings to show which suits which staircase.

The Short Version

Pick Ameistor if you want a cascading step-by-step effect on a 12-step staircase with a color temperature range. Pick GOOMEEYA if you want a long dual-sensor strip with a timer and dimmer in warm 3000K.

Side by Side

Factor	Ameistor	GOOMEEYA
Coverage	12 stairs	16.4 ft strip
Effect	Cascading, step by step	One continuous strip
Sensors	Dual motion sensors	One PIR sensor at each end
Color	3000K to 6000K, dimmable	3000K warm white
Output	Not stated in the title	Up to 2,000 lumens (listed)
Controls	Downward 15 degree spotlights, 2-wire PLC system	Timer and dimmer

Who Should Choose Each

• Ameistor suits a 12-step staircase where the sequential effect matters.
• GOOMEEYA suits a staircase where a simple warm strip is enough.

Who Should Look Elsewhere

• You want no outlet. See our rechargeable stair lights guide.
• You want a controller for custom strips. See our stair light controllers guide.

How We Compared Them

We did not install or run either product. This comparison is based on the Amazon listings and manufacturer specifications, selected November 6, 2026. We could not retrieve current Amazon star ratings, so neither product carries a WikiHomeLED Score and we show no star ratings. Figures are as published by each seller and are not our measurements. Both appear in our plug-in motion sensor stair lights guide, and our method is on the How We Review page.

Frequently Asked Questions

Which lights each step in order?

Ameistor. GOOMEEYA is one continuous strip.

Which gives warm light?

GOOMEEYA is 3000K. Ameistor offers 3000K to 6000K.

Do both need an outlet?

Yes. Both are plug-in.

Safety note: good lighting helps on stairs, but a light does not replace sturdy handrails, even treads, and clear steps. Do not place cords, adapters, or lights where they can be tripped over or knocked loose. Follow each maker’s instructions for power and charging, use only the adapter or cable provided, and keep batteries and small parts away from young children. Hardwired lights should be installed with the breaker off, by a licensed electrician if you are not experienced. Look for a UL or ETL mark. Listings differ; we describe what each maker lists.

Check current pricing and availability for the Ameistor Plug-In Dual Motion Sensor Stair Lights, Cascading (12 Stairs).

Check current pricing and availability for the GOOMEEYA Dual Motion Sensor Plug-In Step Stair LED Strip (16.4 ft, 3000K).

About the author